How To Connect Multiple Routers In Cisco Packet Tracer
How To Connect Multiple Routers In Cisco Packet Tracer . Router 1 has no idea that it should send packets destined to the two networks on the other side of router 2 to router 2, so it drops them. Router> en router# conf t router (config)# ip route 10.0.0.0 255.0.0.0 20.0.0.1 (here, 10.0.0.0 is the network id of the 1st network) router (config)# exit so, the static routing configuration is successfully done. How to Configure Default Route to the Routers Router Switch from chennaicisco.blogspot.com Instead of the hubs you could divide by port range to the switch to connect each of the networks through the vlans. The next prompt you are offered is the username request from the switch connect router0 with router1 using crossover cable or can use automatic if you are preparing for exams with the pt simulator, you can configure a router to connect to it through the console to manage it over the network implement an acl to. Check if there is connectivity between the devices.